2. Stick the clean mop cloth on the hook and loop pads on the mop
cloth mount in position and firmly.
Notes:
A dirty mop cloth will affect the cleaning performance. Clean it before use.
Replace it every 1-3 months to maximize cleaning performance.
1. Remove the dirty mop cloths from mop cloth mounts.
Mop Cloths Replacement
2. Remove the dust bag in the direction of the arrow and discard it.
3. Install a new dust bag in place along the slot and unfold the dust
bag to maximize emptying performance. Reinstall the dust
container cover in place to make sure the dust container is
securely sealed.
Note:
The dust bag handle seals the bag on removal to prevent dust leakage.
Note: To prevent the dust container cover from falling and hitting the robot, remove the cover
with both hands, one on each side.
Note: Make sure the disposable dust bag is properly installed to avoid waste escaping and
damaging the dock.
1. Remove the dust container cover.
Disposable Dust Bag Replacement
2. Install a new filter in place, and then close the filter cover.
1. Open the filter cover and remove the filter.
Washable Filter Replacement
Notes:
Do not touch the surface of the filter with your hands, brushes, or hard objects to avoid
potential damage.
Replace the filter every 6-12 months to maintain its performance.
2. Install the new main brush cover. Make sure its four teeth are fully
seated in the slots, and then press on the main brush cover to lock
it in place.
1. Turn over the robot and press the two latches inwards to remove
the old main brush cover.
Main Brush Cover Replacement
1. Turn the robot over, then unlatch
and remove the main brush cover.
Main Brushes Replacement
3. Install the main brush bearings to
the new main brushes. And then,
install the main brushes and make
sure the color of the main brush,
main brush bearing and the arrow
on the robot match.
2. Lift the main brushes and pull them
out, remove bearings and remove
any entangled hair or dirt.
4. Reinstall the main brush cover. Make
sure its four teeth are fully seated in
the slots, and press the main brush
cover to lock it in place.
Note: Replace the main brushes every 6-12 months to maintain cleaning quality.
*
Images are for illustration purposes only and may not exactly represent the product.
2. Align the central groove of the new side brush with the raised
position on the robot, and tighten the screw to reinstall it.
1. Turn over the robot, unscrew the side brush screw to remove it.
Side Brush Replacement
Note: It is recommended to replace the side brush every 3-6 months to ensure effective cleaning.
